Tavlit Semi-automatiskt filter fiberglasförstärkt nylon 2" utvändig gänga 10bar 120mikron 0,12 mm disk svart type Adir One-Action Super
Artikelnummer 7028549
Manualer & ritningar
Alla visade priser är inklusive moms. Logga in eller kontakta försäljningen för anpassade priser.
Pris momsfri
13 227,90 kr / 1 st
13 227,90 kr / st
Pris momsfri
13 227,90 kr / 1 st
13 227,90 kr / st
Tillgänglig hos leverantör, vänligen kontakta oss
- tillgänglig på begäran, vänligen kontakta säljteamet
Frequently bought together
7028557
Tavlit Manuellt filter PP 1" invändig gänga 10bar 120mikron polyester mask svart type Eitan
Subscription
165,40 kr
7038263
7030810
Tavlit Swivel övergång PP 1" invändig gänga x utvändig gänga 10bar type with O-ring
Subscription
20,60 kr
7033614
Tavlit Y-koppling PP 20 mm x 3/4" x 20 mm hulling x utvändig gänga x hulling 8bar
Subscription
15,20 kr
7019389
Tekniska detaljer
-
Filtrering0,12 mm
-
Filteryta0.1025 m²
-
Anslutningutvändig gänga
-
Kapacitet25 m³/h
-
PackningsmaterialEPDM
-
Tryck10 bar
-
Material filterelementdisk
-
Materialfiberglasförstärkt nylon
-
TypSuper
-
Filtrering120 mikron
-
Färgsvart
-
Längd235 mm
-
Filtrering120 mesh
-
Backspolnings flow rate9,3 m³/h
-
EAN4019305709934
-
Artikelnummer7028549
-
TillverkareTavlit
Produkt beskrivning
One Action cleaning saves water as the water used for flushing the discs is filtered with an internal screen and put back in the system.
Comes with a standard pressure indicator that shows the user that the filter is dirty and needs flushing (preset value set to 0.5b).
Flushing is performed simply by turning the operation handle ¼ of a turn for 20 seconds.
During flushing, the flow to the field is uninterrupted.
Minimum flushing pressure required: 2bar.
Flushing flow rate: 2bar = 9.3m3/h, 3bar = 12m3/h.
When the filter is clean after flushing, the user needs to flush the secondary port by opening the service valve for 10 seconds.
We recommend to install a manual valve (open/close) in the upstream.
Comes with a standard pressure indicator that shows the user that the filter is dirty and needs flushing (preset value set to 0.5b).
Flushing is performed simply by turning the operation handle ¼ of a turn for 20 seconds.
During flushing, the flow to the field is uninterrupted.
Minimum flushing pressure required: 2bar.
Flushing flow rate: 2bar = 9.3m3/h, 3bar = 12m3/h.
When the filter is clean after flushing, the user needs to flush the secondary port by opening the service valve for 10 seconds.
We recommend to install a manual valve (open/close) in the upstream.
